Select "Target" from the top bar and "Connect to JLINK". Author prefers to use a RuuviTag ziptied to ruuvi Development kit. Enter your details and you'll receive activation key on your email.Īfter a short while you should see "Build Complete" and Flash + RAM usage report.Ĭonnect your RuuviTag to your JLINK and JLINK to your computer via USB. On first compilation you're asked to register SES. To verify that you have everything as needed, select "Build" from the top bar and click "Build ". You can open the project by selecting "File" from the top bar and the "Open solution". Version 3.30.2 of Ruuvi firmware uses Noridc SDK 15.3Īfter you have installed the SES, simply open the project file from /src. Then you should download Nordic Semiconductor SDK and unzip on the same level as project. The firmware implements the functionality of official Ruuvi Firmware as of July 2019, it is built on top of Nordic SDK15 which has official support for SES. Head to the Segger website and select the version for your operating system. You can also follow Nordic Semiconductor's video instructions to get started. It's possible to use SES without Ruuvi development shield, but using a wired JLINK connection of nRF52-DK is strongly recommended. This is a very different approach from GNU-tools, which generally follow the principle of doing only one thing such as compiling, linking or debugging. IDE brings together almost all the steps required for developing C-code for RuuviTags, such as writing the code, compiling the code, flashing the code to RuuviTag and debugging the code as it is being run on RuuviTag. Segger Embedded Studio (SES) is an Integrated Development Environment (IDE) for Nordic Semiconductor products, such as nRF52832 which is at the heart of RuuviTag.
0 Comments
Leave a Reply. |